Transparent PFA tube plastic pipe

 

high Corrosion Resistance/high Temperature Resistance/Transparent teflon PFA tube

1) Use:

  •  LCD manufacturing equipment
  • Single fiber light-emitting whole body single-ended tube
  • Heat exchangers, steam piping
  • High-purity reagents Pipeline
  • A variety of corrosive media (harsh solvents) pipeline
  • Submersible motor with a slot insulation tube
  • Air-conditioning control wiring harness assembly,
  • All-inclusive fluoride O-ring plastic tube

 

2) Utilization Characteristics:

  • High and low temperature
  • -200 ~ 255°C high temperature
  • Not sticky, water fight, fight oil
  • Electricity reliability, high insulation
  • 60HZ-60MHZ both high and low temperature dielectric constant 2.1.
  • Even if the surface due to flash over and the damage it does not produce conductive tracks.
  • Volume resistance&g>1018Ωm
  • Surface resistance&gt>2 X 1013Ω
  • Arc&gt>165 seconds without leakage
  • Corrosion resistance
  • Only high temperature element fluorine, alkali metals and it works on all the other thick, dilute inorganic acids, alkalis, esters had no effect.
  • Low water absorption
  • Low suction rate of <0.01%
  • Incombustibility
  • The air will not burn. (Oxygen index> 95vol.%)
  • With physical inertia
  • Transparency
  • Optical refractive index in the lowest of all plastics
  • Weatherability
  • Can be prolonged exposure to ozone, the sun
  • Easy processing of secondary
  • Can be self-appointed, self-welding can be flange, it can be set to control